Lithophane Maker

Turn a photo into a lithophane STL file for 3D printing. Crop your image, choose a flat, curved or full-cylinder shape, then preview and download the model for your slicer. Your photo is processed in your browser.

1. Choose and frame a photo

JPG or PNG · up to 20 MB and 16 megapixels. Photos are processed locally.

No photo selected
2. Set the shape and image

Panel height follows the cropped photo proportions.

Light areas are thinner; dark areas are thicker. Curved and cylinder height follows the cropped photo ratio after rotation.

Choose a photo to start.

Your model preview

Illustrative winter tree sample

The winter tree is only an example. Generate your own model to see its real shape here.

Preview the same model you download. Drag to rotate; scroll or pinch to zoom. Backlight is illustrative and does not predict print brightness.

How to make and print a lithophane

1. Choose and frame a photo

Use one JPG or PNG up to 20 MB and 16 megapixels. Start with a sharp photo and crop around its main subject; rotate or mirror if needed.

2. Set the shape and relief

Choose a flat panel, curved panel or closed 360° cylinder. Adjust size, thickness, brightness, contrast and detail, then generate the model. Cylinder height follows the rotated crop ratio; use cropping to change it.

3. Download and slice

Import the STL into your slicer as millimeters. Check orientation and sliced layers for thin areas, then make a small test print with your intended material and light source.

Choose thickness, size and detail

Lighter image areas become thinner; darker areas become thicker. Start with the current thickness values and Standard detail, then print a small test using your intended material. Adjust brightness, contrast or Negative image if the preview tones look reversed. Coarse uses 1.6 mm detail spacing, Standard 0.8 mm and Fine 0.3 mm. Fine keeps more mesh detail but can take longer to generate and create a larger STL; check the file size shown after generation.

For a flat panel, set its surface width; height follows the cropped image ratio. A curved panel uses the chosen radius. A cylinder wraps the photo through 360°: set its outside diameter and let height follow the rotated crop ratio. The tool reports the generated size. STL files do not store units, so import this output as millimeters in your slicer.

Fix dark, bright, blurry or uneven lithophanes

Image looks too dark or bright

Check the Negative image setting, adjust brightness and contrast, and review the thickness range. Confirm the result with your intended backlight and in the slicer preview.

Photo details look soft

Use a sharp source photo, crop around the subject and try Fine detail. Compare the slicer layers at the intended print size; nozzle width and layer height affect which details can be printed.

Thin spots or missing features

Inspect the slicer layers for walls that are too small for your nozzle. Increase the thinnest value or adjust image contrast, then slice again and review those areas.

Backlight looks uneven

Increase the distance between light sources and the panel or add diffusion behind it. Hotspots vary with the LED layout, diffuser and enclosure.

Vertical printing can show more fine detail, while a panel placed flat is less prone to wobble. Compare both orientations in your slicer and choose based on the detail and stability your printer can support. UltiMaker's lithophane guidance describes this detail/stability trade-off; Prusa's workflow recommends flat placement to reduce wobble.

Lithophane Maker FAQ

What photo should I use for a lithophane?

Start with a sharp photo and a clear subject. Crop distractions; adjust brightness or contrast if the tones are too close together. Use a larger final panel and Fine detail to retain smaller features, then inspect the sliced layers.

How do I choose thickness and detail?

Light areas are thinner and dark areas thicker. Start with the current 0.8–3.2 mm range and Standard detail, then make a small test print with your material. Fine uses 0.3 mm spacing for more detail, but creates a larger file and takes more work to generate.

Which filament and print orientation should I use?

White PLA is a common starting material; color and translucency change how light passes through the print. Vertical printing can show more detail but is less stable, while flat placement reduces wobble. Compare both orientations in your slicer and follow your printer guidance.

Why can I see individual LEDs behind the panel?

Try increasing the distance between lights and the panel or adding diffusion. Visible hotspots depend on the LED layout, diffuser and enclosure.

What does the STL include, and where is my photo processed?

The download is a binary triangle mesh, not G-code, a full 3D portrait, color data or printer settings. Import it as millimeters in a slicer before printing. Your selected photo is decoded and processed locally; it is not uploaded to our server.